Page 71 - 《橡塑技术与装备》2017年15期(8月橡胶)
P. 71

原材料与配方                                                   李旭 等·CR 对“绿色”V 带压缩胶性能的影响


               Effect of CR on the properties of “green” V-belt compressive adhesive


                                                       Li Xu,Deng Tao
                          (Qingdao University of Science & Technology, Qingdao 266042, Shandong, China)
                  Abstract: This paper studied the use of different amounts of chloroprene (CR) to replace the NR/BR gel in
              the original formula,and the effects of v-belt compressed adhesive on the physical mechanical properties
              and the thermal properties of compression before and after ageing. The heating of V-belt compression
              adhesive is shown by examining the loss factor and the compression temperature rising. The results showed
              that the tensile strength, tensile stress, fracture elongation and hardness of compressed glue were lowered
              and then increased with the amount of CR replacement gradually increased. Performance retention rate
              of tensile strength and elongation at break were all improved compared to the original formula after aging
              of 100℃ for 24 h. Known from the compression fatigue test ,the compression temperature rise was increased
              compared to the original formula after using the CR. By the RPA temperature scanning, loss factor increases
              after using CR at the temperature of 60、80、130℃ and reduced after aging of 100 ℃ for 24 h. Therefore, the
              anti-aging performance of the "green" v-belt compression adhesive was improved after using CR.
                  Key words: CR; tanδ; V-belt; RPA; aging
                                                                                                          (R-05)





                                          锦湖轮胎斩获行业三大设计奖

                  2017 年刚过半,锦湖轮胎就将行业三大设计奖收入囊中,2 月携多功能车 (SUV) 的高性能轮胎
              CRUGENHP71 荣获德国 “iF 设计大奖 ” ; 4 月高性能轮胎翼驰达 ECSTAPS71 和采用创新技术的未来概念轮胎
              Smasher 荣获 “ 红点设计大奖 ” ; 6 月 29 日,蕴含未来技术力的概念轮胎 BON 一举斩获美国 “2017IDEA 设计大
              奖 ”—— 运输设备领域入围奖。
                  享誉世界的三大设计大奖之一的美国 “IDEA 设计大奖 ” 是由美国工业设计师协会 (IDSA) 主导的世界最高权
              威的设计评选,评判标准主要有设计的创新性、对用户的价值、是否符合生态学原理,生产的环保性、适当的美
              观性和视觉上的吸引力,以此选定最优秀的设计作品。
                  而在轮胎领域内,要设计一款兼顾实用性、环保性、美观性和价值性的轮胎,打破原有的轮胎制式形态,这
              对轮胎企业而言极富挑战性。由于现有的非充气轮胎大部分都是单向结构形态,这意味着轮胎在高速旋转时产生
              的负荷较弱,但是,锦湖轮胎推出的此款概念轮胎 BON,其接地面全部采用泰森多边形 ( 蜂窝 ) 结构,且全向交织,
              轮胎在任何行驶条件下都能承受高强度负荷及冲击。与此同时,此款概念轮胎 BON 还采用高强度材料,与现有
              产品相比,不仅能确保安全性,还具有减少负荷的效果,从而有效改善汽车油耗。
                  锦湖轮胎技术研究本部的郑泽均 ( 音译 ) 专务称 : “ 此次获得 IDEA 设计大奖,是锦湖轮胎拥有未来设计力量
              及技术力的成果。锦湖轮胎正在为将来做准备,研究各种概念轮胎,不断强化设计力量和技术力,成为引领全球
              轮胎行业的企业。”
                                                                                   摘编自“中国塑料机械网”
                                                                                                          (R-03)










                    年
              2017     第   43 卷                                                                      ·19·
   66   67   68   69   70   71   72   73   74   75   76