Page 67 - 《橡塑技术与装备》2017年17期(9月橡胶版)
P. 67

理论与研究                 张作鑫 等·热预处理时间对 EPDM/FKM 性能影响及共混胶老化过程中交联密度变化的研究


                                                                伸长率下降,硬度变大,100% 定伸应力变大。综合
                                                                考虑性能,预处理时间为 6 min 为最佳。
                                                                   (4) 在 老 化 过 程 中,EPDM 相 交 联 密 度 增 大,
                                                                FKM 相交联密度缓慢增大,共混胶总交联密度有所增
                                                                加。


                                                                参考文献 :
                                                                [1]   邓本诚,李俊山 . 橡胶塑料共混改性 [M]. 北京 : 中国石化出
                                                                    版社,1996.
                                                                [2]   范新刚,刘毓真,张言波,等,四丙氟橡胶与三元乙丙橡胶
                                                                    并用体系的研究 [J]. 特种橡胶制品,1999,20(5):22~23.
                     图 12 总交联密度与扯断伸长率的关系                        [3]   周童杰,张祥福,张勇 . 氟橡胶 /EPDM 动态硫化共混物的研
                                                                    究 [J]. 橡胶工业,1999,46(8):451~455.
                                                                [4]   余慧,何显儒,容耀强,等 . 氟橡胶 / 三元乙丙橡胶密封材料
                 (3)热空气老化中,随着老化时间的延长,当热
                                                                    的制备及性能研究 [J]. 润滑与密封,2013,38(1):39~44.
              预处理时间为 4  min 时,拉伸强度先下降后上升 ;当
                                                                [5]   陈青,魏伯荣,胡小锋 . 氟橡胶的改性研究进展 [J]. 特种橡胶
              热预处理时间为 6  min 时,拉伸强度缓慢上升。扯断                          制品,2004,25(2):57~61.
                  Effects of heat pretreatment time on EPDM/FKM performance and
                   crosslinking density change of blended rubber in aging process

                                                 Zhang Zuoxin, Li Xu, Deng Tao

                         (Qingdao University of Science and Technology, Qingdao 266042, Shandong, China )
                  Abstract:  This  paper  studies  the  influence  of  different  heat  pretreatment  time  on  EPDM/FKM
              performanceand the performance and crosslinking density change in the aging process. Experiments show
              that the tensile strength of the blend increases first and then decreases with the increase of pretreatment
              time, the elongation at break decreases, and the hardness and 100% stress at definite elongation increases. In
              the hot air aging, with the aging time prolonged, the tensile strength decreased first and then increased when
              the thermal pretreatment time is 4 min; When the pretreatment time is 6 min, the tensile strength increases
              slowly, the elongation at break decreases, the hardness becomes larger, and the 100% stress at definite
              elongation increases. During the aging process, the crosslinking density of EPDM increased, the cross density
              of FKM increased slowly, and the total crosslink density increased. Considering the performance, the thermal
              pretreatment time is 6 min better.
                  Key words: thermal preprocessing time; physical mechanical properties; hot air aging; crosslinking density
                                                                                                          (R-05)


                   缅甸出口中泰两国的橡胶量                                 6 月份只有 2 082 t,减少 766 t。
                         环比减少 4 240 t                               据 缅甸 橡 胶 种植 者 协会 公 布 的价 格 数据, 缅 甸
                                                                的橡胶价格已随着国际市场上的橡胶价格上涨,   RSS
                  据缅甸相关边贸口岸发布的消息,由于橡胶已过                         天然橡胶的离岸价(FOB 价)每吨上涨 50 多美元,
              交割期,2017 年 6 月份,缅甸与中、泰两国边贸口岸                      MSR 橡胶离岸价涨了 100 多美元。
              的橡胶出口环比减少 4 240 t。                                    进入 7 月,木姐口岸的 RSS3 橡胶为 193.7 万缅
                  2017 年 5 月份,缅甸在缅 - 中边境的木姐 105                 元 /t,与 6 月底价格相比上涨 7  567 缅元,RSS5 橡胶
              码贸易区和缅 - 泰边境的大其力贸易区,共出口橡胶                         价为 184.1 万缅元 /t,上涨 1 567 缅元。
              11 154 t,6 月份只出口 6 914 t。                                            摘编自“中国塑料机械网”
                  同样,缅甸 5 月份通过海上贸易出口橡胶 2 848 t,                                                          (R-03)


              2017     第   43 卷                                                                        ·9·
                    年
   62   63   64   65   66   67   68   69   70   71   72