Page 86 - 《橡塑技术与装备》2023年5期
P. 86

橡塑技术与装备                                          CHINA RUBBER/PLASTICS  TECHNOLOGY  AND EQUIPMENT

             开合模液压系统,介绍了采用 AMESim 进行液压系统                           中的应用研究[J].橡塑技术与装备,2016,42(19):60-66.
                                                               [2]   吴畏,伍先安,杨卫民,等 . 轮胎硫化设备及工艺研究进展 [J].
             仿真的方法,并对开合模液压系统的功率特性进行了
                                                                   橡胶工业,2018,65(06):711-716.
             分析,结果表明,这种采用定量泵加节流调速回路的                           [3]   邹炳燕,杨健,李颖,等 .80 MN 胶囊硫化机液压系统设计 [J].
             硫化机开合模液压系统,在慢速开合模过程中,为了                               机床与液压,2016,44(08):34-36.
                                                               [4]   王超群 . 航空子午胎硫化机伺服液压系统中开合模控制的
             适应工作流量变小的需求,存在较大的节流损失和溢
                                                                   优化设计思路 [J]. 橡塑技术与装备,2019,45(21):54-61.
             流损失,导致系统效率不高。在后续的开合模液压系
                                                                   DOI:10.13520/j.cnki.rpte.2019.21.011.
             统优化设计中可采用伺服控制系统来适应流量变化需                           [5]   韩青,叶选林,任杉,等 . 液压轮胎定型硫化机液压系统设计
             求,保持系统高容积效率,降低能源消耗。                                   与仿真 [J]. 机床与液压,2014,42(01):116-119.
                                                               [6]   刘晓莲,李坤,赵雄鹏 . 液压支架上升回路的 AMEsim 建模
                                                                   和仿真 [J]. 机械工程师,2020(12):153-155.
             参考文献 :
             [1]   艾同辉,姚宁,张令,等.HFST 伺服液压系统在轮胎硫化机




                Simulation of the hydraulic system for opening and closing mold of
              curing press based on quantitative pump and throttle speed regulation


                                              1
                                    Chen Luqi , Ai Zijian , Zhang Jie  , Chen Ye  , Chen Kexin  1
                                                                         2
                                                                2
                                                      1
                (1. School of Mechanical and Electrical Engineering, Sanming University, Sanming 365004, Fujian, China;
                          2. Fujian Tianhua Intelligent Equipment Co. LTD., Sanming 365004, Fujian, China)
                 Abstract: This article uses a quantitative pump and a throttle speed control circuit for the hydraulic
             system of the curing press opening and closing molds, and uses AMESim software to simulate and analyze the
             hydraulic system of the opening and closing molds. Research has found that the hydraulic system for opening
             and closing the mold of a vulcanizing machine using a quantitative pump and throttle speed control circuit
             has significant throttling and overflow losses during the slow opening and closing processes, resulting in low
             system volumetric efficiency. The above conclusions provide theoretical and technical references for the
             design and optimization of the hydraulic system of the curing press.
                 Key words: curing press; opening and closing mold; hydraulic system; throttling speed regulation; AMESim
                                                                                                       (R-03)



                       NEV 能源汽车观察 :探索绿色出行,体验智能驾驶新时代
                   NEV Energy Vehicle Watch: Explore green mobility and experience a new era of intelligent driving
                 新能源汽车已逐渐成为时代潮流,您是否希望紧跟发展脉络,了解新能源汽车的全新资讯、探寻前沿技术,
             拥抱未来之路。“NEV 能源汽车观察 ” 公众号平台,愿为您提供全方位的资讯支持!
                 在这里,我们关注新能源汽车产业的动态,研究各类技术创新,关注政策法规,力求为您带来实时、全面的信息。
             我们邀请业内知名专家,采访行业内的企业代表,深入剖析新能源汽车市场的趋势。我们的团队更是实地试驾各
             款新能源汽车,为您提供专业且真实的体验报告。
                 无论您是新能源汽车的关注者,还是绿色出行、环保意识的倡导者,“NEV 能源汽车观察 ” 都将是您的理想
             平台。在这里,我们共享经验、交流见解,引领绿色出行的时代风向,共绘美好的未来。
                 关注 “NEV 能源汽车观察 ” 公众号平台,与我们共同探索新能源汽车的广阔天地。让我们携手推动绿色出行、
             智能驾驶的进步,为地球环境保护贡献力量,迈向更美好的出行未来!
                                                                                  摘编自 “ 中国轮胎商务网 ”
                                                                                                       (R-03)

                                                                                                         5
             ·38·                                                                              第 49 卷  第 期
   81   82   83   84   85   86   87   88   89   90   91